![]() For more information, please visit our website at www.gmb. This article was sponsored by GMB North America, Inc. A blown head gasket can be diagnosed with a compression test. In some situations, coolant is forced into the oil, and ends up in the oil pan. It can also cause the coolant to leak into the combustion chamber and burn. Coolant can easily leak into the transmission fluid and severely damage the transmission.Ī blown head gasket may cause the oil to leak into the cooling system. This is a “two way” leak, so the technician needs to check the transmission for coolant too. If this happens, the transmission fluid can get mixed into the coolant. The wall separating the transmission cooler from the radiator can develop cracks. Sometimes the transmission cooler is integrated into the radiator. In most trucks with an automatic transmission, the transmission fluid is cooled by a transmission cooler. Oil is under much higher pressure than coolant, so this is usually a “one way” leak. When the oil cooler fails, oil forces its way into the cooling system. Most modern heavy duty trucks have an oil cooler. ![]() The best way to pinpoint the problem is to examine the three different parts that often cause oil/coolant contamination. Another symptom is that the oil level is higher than it should be. Look for sludge on the dipstick or underside of the fill cap (if the fill cap is on a valve cover). If there is a pinkish brownish sludge, coolant has entered the transmission.Ĭoolant in the Oil – If coolant enters the engine oil, the there are several visible signs. Also look for a pinkish brownish sludge at the top of the radiator.Ĭoolant in the Transmission Fluid – The coolant on the transmission dipstick should be pink. Transmission Fluid in the Coolant – Often, the first symptom of transmission fluid in the coolant is a swollen radiator cap seal. If the problem is more advanced, a brownish sludge will be visible at the top of the radiator. This will be visible after pulling the radiator cap, or you may see it in the overflow reservoir. Oil cooling is the use of engine oil as a coolant, typically to remove surplus heat from an internal combustion engine. Oil in the Coolant – The first symptom of oil in the coolant is an oily sheen on top of the coolant. You need to train them to look for the following symptoms: Don’t assume that they know what to look for. If you look at the side of your coolant reservoir at home or simply turn your car on and let it idle for a few minutes, then pop open the cap to your coolant reservoir to see if it has a film on top of it. ![]() Often, junior technicians are responsible for routine maintenance. The Texture of Coolant: Oil in the coolant can alter the texture of your coolant making it a slightly different color and feel. ![]() They should also be looking for signs of coolant in the engine oil or transmission fluid. Your employees should be inspecting your trucks on a regular schedule for signs of oil in the coolant. If repairs are made quickly, major damage can be prevented. If there is oil in a heavy duty truck’s coolant, it always means there’s a serious underlying problem. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |